Honeywell INNCOM e7w

INNCOM e7w THERMOSTAT USER GUIDE
43
31-00302-01
Enter Service Mode and select PA parameter.
Press MODE to view value 30
Change value to 14 , press FAN to store change. e7w will
beep and return to display PA
Value
Value
Press F/C button to exit back to reG (rE6) and press F/C again to get Str (Store) on the
display.
Press FAN button to store the change. The e7w will RESET and exit Service Parameter
Mode
The e7w will RESET and exit out of Service Parameter mode