Honeywell NetAXS - Configuring the System

Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-3
2.2 Configuring the System
Click Configuration > System in the NetAXS™ menu to display the System Configuration (General)
screen:
2.2.1 General Tab
The General Tab enables you to:
• Set the general configuration settings.
• Reset the panel.
Steps: Use the descriptions in the following table to configure the general settings, and click Submit
Changes
:
Table 2-1: Configuration > System > General Tab Fields
Parameter Description
Name Unique name that identifies the panel.
Address Displays the address set by the panel’s DIP switches.
Type Displays “NetAXS” as the panel type.
Boot Time Displays the time that power was applied to the
NetAXS™ panel.