Honeywell NetAXS - Groups Tab; Figure 2-22: Configuration > Other I;O & Groups > Groups Tab

2-49 www.honeywell.com
Configuring via the Web Server
Configuring Other I/O & Groups Tab
2.7.3 Groups Tab
This tab enables you to configure outputs in groups. For example, you might want a group of horns in
your facility to sound for the same duration or to be enabled or disabled according to the same
schedule, or time zone. You might want a group of doors to be energized or de-energized during the
same time zone. A NetAXS™ web server supports up to 64 output groups.
Click
Groups to display the Groups screen:
Figure 2-22: Configuration > Other I/O & Groups > Groups Tab
First Card Rule Requires a valid card read before the time zone (period in which
doors are unlocked) can take effect. For example, the principal
of a school would normally open the school with a valid card
read, and the time zone becomes active at its normal time. When
the school is cancelled due to a storm, the principal stays home,
the doors are not opened, and the time zone does not become
active at its normal time. Note that both Snow Day and First
Card Rule cannot be enabled at the same time.
Table 2-11: Configuration > Other I/O & Groups > Outputs Tab > Fields (continued)
Setting Description