Honeywell NetAXS - Displaying and Modifying Cards; Figure 2-15: Cards > Card Data

Configuring via the Web Server
Maintaining Cards
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-39
2.6.2 Displaying and Modifying Cards
Use this function to display specified cards and modify them.
Click
Cards > Card Data to display the search screen with which you can find and
display specified cards.
Figure 2-15: Cards > Card Data
The Display or Modify Card(s) screen enables you to:
• Display cards by searching on any of the following keys:
– Card number
– Card holder’s last name
• Modify the displayed card(s)
Steps:
1. Enter a value for either of the search keys (card number or cardholder last
name).
2. Click the Display/Modify Card(s) button. The cards specified in step 1 appear.
3. Use the field descriptions given in the table in “Adding New Cards“ on page
36 to complete the card fields and click
Submit Modification(s):