2-6 www.honeywell.com
Configuring via the Web Server
Configuring the System
2.2.2 File Mgmt Tab
Firmware is software that is embedded in the NetAXS™ board. The firmware provides this web
interface and all access control functionality. Periodically, the firmware is updated. This tab enables
you to download new versions of the firmware, revert to a previous version of the firmware, upload
and/or download card and configuration databases.
Click
File Mgmt to display the File Management tab:
Figure 2-2: Configuration > System > File Mgmt Tab
The File Mgmt tab enables you to:
• View the current firmware configuration.
• Download firmware from the host to the panel.
• Revert to a previous firmware version.
• Upload card and configuration data from the panel to the host system.
Steps to download firmware from the host to the panel:
1. Click Browse to locate the firmware file.
2. Click
Download to download the firmware.
Steps to revert to the previous firmware version:
1. In the Active Image column, click to select the firmware version to which you want to revert.
The prompt “Switching to an alternate firmware set requires a panel reboot” appears.
2. Click
OK to reboot the panel.
To Next Page
Loading...
