Honeywell NetAXS - Site Codes Tab; Figure 2-4: Configuration > System > Site Codes Tab

Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-9
2.2.4 Site Codes Tab
Site codes identify an enterprise’s site. You can create a maximum of eight site codes
to serve as secondary IDs (in addition to the card number) on the card for additional
validation.
Click
Site Codes to display the Site Codes tab:
Figure 2-4: Configuration > System > Site Codes Tab
The Site Codes tab enables you to:
• View existing site codes.
• Create one or more site codes.
• Modify an existing site code.
• Delete a selected site code.
• Delete all site codes.
Steps to delete all site codes:
1. Click
Delete All Codes to display a prompt.
2. Click
OK to delete the codes.