NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 4-1
4
Monitoring NetAXS™ Status
4.1 Overview
This chapter is written for the NetAXS™ operator who will monitor the following
NetAXS™ status:
• Alarms – Alarms are events, or system transactions, that have been assigned
alarm status. These often include events such as an invalid card read or a
forced door.
• Events – Events are the recorded transactions of the NetAXS™ system. For
example, an event card found, number of users logged in.
• Inputs – Inputs are terminals located on the NetAXS™ panel; the inputs are
wired to input points, such as a card reader, elsewhere in the NetAXS™
system.
• Outputs – Output relays are switches located on the NetAXS™ panel that are
connected to output devices, such as a door lock, elsewhere in the NetAXS™
system.
• System – This includes status for other NetAXS™ system objects.
Overview 4-1
Monitoring Alarms 4-2
Monitoring Events 4-5
Monitoring Inputs 4-7
Monitoring Outputs 4-10
Monitoring System Status 4-12
To Next Page
Loading...
