Honeywell NetAXS - Figure 2-21: Configuration > Other I;O & Groups > Outputs Tab > Downstream

Configuring via the Web Server
Configuring Other I/O & Groups Tab
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-47
Click Downstream to display the Downstream Output screen:
Figure 2-21: Configuration > Other I/O & Groups > Outputs Tab > Downstream
The Outputs tab enables you to:
• Configure the following for each of the auxiliary outputs -- on board the panel
as well as downstream:
–Name
– Pulse time
– Time zones
– Latching
–Interlock
–Keep on
– Snow day
– First card rule