2-16 www.honeywell.com
Configuring via the Web Server
Configuring Time Management
Steps: Use the descriptions in the following table to configure the time settings:
Table 2-3: Configuration > Time Management Tab Field Descriptions
Setting Description
Current loop time Displays by default the current time setting.
Format
12 hour – The 24-hour day is divided into two 12-hour
halves, a.m. and p.m.; each half is numbered 1-12.
24 hour – The hours in the 24-hour day are numbered
consecutively 0-23.
New Date Specifies a new date to be the current date.
New Time Specifies a new time to be the current time.
Geographic Time
Zone
Select the geographic time zone in which the panel will
operate.
Time Server Enter the IP address of the machine whose time is used as
the standard for all panels.
Enabled – Select to enable the specified machine to be the
active time server.
Update Interval – Specifies the interval of time between
each automated synchronization.
Force Timesync – Synchronizes the time between the time
server and panel(s) manually.
To Next Page
Loading...
