Honeywell NetAXS - Table 2-13: Configuration > Interlocks > Field Descriptions

2-52 www.honeywell.com
Configuring via the Web Server
Configuring Interlocks
Steps to create an interlock:
1. Click the
New Interlock button to display the screen.
2. Use the descriptions in the following table to configure the interlock:
3. Click the
Add Interlock button to create the interlock.
Table 2-13: Configuration > Interlocks > Field Descriptions
Interlock element Description
Trigger Specifies the input, output, or output group for
which a change of state will cause a reaction from
another input, output, or group. Also, use the drop
down list to specify the number of the input,
output, or group.
Reacting Component Specifies the input, output, or output group that
will react to a change of state from the trigger
point. Also, use the drop down list to specify the
number of the input, output, or group.
Reacting Component’s
Action
Upon Trigger Alarm – Specifies the reacting
component’s action when the trigger’s change of
state occurs. Select the action from the Upon
Trigger Alarm drop down list.
Upon Trigger Normal – Specifies the reacting
component’s action when the trigger’s change of
state occurs. Select the action from the Upon
Trigger Normal drop down list.