Honeywell NetAXS - Page 71

Configuring via the Web Server
Configuring Interlocks
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-53
Steps to modify an interlock
:
1. In the Int Lk column, click the number of the interlock you want to modify.
2. Click the
New Interlock button.
3. Use the descriptions in the table above to make the desired modifications in the empty Trigger,
Reacting Component, and Reacting Component’s Action fields for the selected interlock:
4. Click the
Add Interlock button to complete the modification.
Steps to delete an interlock:
1. In the Int Lk column, click the number of the interlock you want to delete.
2. Click the
Delete Interlock button to display the Delete Interlock screen, and click OK to
complete the deletion.
Steps to enable/disable an interlock:
1. To enable an interlock, click the
Enable button.
2. To disable an interlock, click the
Disable button.