Honeywell NetAXS - Figure 4-2: Status > Alarms > Acknowledged Tab; Table 4-1: Status > Alarms Field Descriptions

Monitoring NetAXS™ Status
Monitoring Alarms
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 4-3
Click the Acknowledged tab to display the acknowledged alarms:
Figure 4-2: Status > Alarms > Acknowledged Tab
The following table describes the information displayed on both the New alarms tab and
Acknowledged alarms tab:
Table 4-1: Status > Alarms Field Descriptions
Column Head Description
Ack (New tab
only)
Enables you to select any or all of the alarms that you want to
acknowledge. Note that acknowledging an alarm simply means
that you acknowledge that the alarm exists; an
acknowledgement does not mean action has been taken. To
acknowledge an alarm, select the check box and click the
Acknowledge Selected Alarms button. Note that you can select
or de-select all of the alarms by selecting or de-selecting the
Select/De-select All Displayed check box.
Date/Time [ID] Provides the date and exact time the alarm was generated
according to the panel’s time.
Device Name [ID] Identifies the device that generated the alarm.