Honeywell NetAXS - Holidays Tab; Figure 2-9: Configuration > Time Management > Holidays Tab

Configuring via the Web Server
Configuring Time Management
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-19
2.3.3 Holidays Tab
Holidays are days when no work is scheduled at the facility. These holidays are used in time zone
configuration (see “Time Zones Tab“ on page 17).
Click the
Holidays tab:
Figure 2-9: Configuration > Time Management > Holidays Tab
The Holidays tab enables you to:
• Create a holiday.
• Modify a holiday.
• Delete a holiday.
Steps to create a holiday:
1. Enter the name of the new holiday in the
Name field (up to 25 characters).
2. If the holiday’s duration is one day, select
Single day. If the holiday’s duration will be more than
one day, select
Multiple day.
3. If the holiday will occur annually, select the
Annual checkbox.
4. Assign a type to the holiday, either Type 1, Type 2, or Type 3. The type you assign will map to
a time zone configuration, and the holiday will be regarded according to the rules of that time
zone (see “Time Zones Tab“ on page 17).