Honeywell NetAXS - Table 2-12: Configuration > Other I;O & Groups > Groups Tab Field Descriptions

2-50 www.honeywell.com
Configuring via the Web Server
Configuring Other I/O & Groups Tab
The Groups tab enables you to:
• Associate any of the panel’s eight output relays in one or more groups.
• Configure the following for each group:
–Pulse Time
– Energized TZ (Time Zone)
– Interlock Disabled TZ (Time Zone)
– Latch
Steps: Use the descriptions in the following table to configure each group:
Table 2-12: Configuration > Other I/O & Groups > Groups Tab Field Descriptions
Setting Description
Name Enter a unique name to identify the group.
Pulse Time Specifies the duration for which the device will assume
abnormal status. For example, it specifies how long a horn will
blow or a door strike will remain released. Enter the desired
number of hours (1024 maximum), minutes (60 maximum), and
seconds (60 maximum). The sum of all three units comprises the
pulse time. Note that you can express seconds in tenths of a
second.
Energized TZ Specifies the period during which the group of output relays are
automatically energized.
Interlock Disabled
TZ
Specifies the period during which the interlocks that control the
group’s outputs will be disabled.
Latch Toggles the state of the outputs between energized and
de-energized status upon every activation (code use, interlock,
or manual pulse).