2-38 www.honeywell.com
Configuring via the Web Server
Maintaining Cards
Expiration Date Specifies the date that a visitor’s card is de-activated. A visitor’s
card is one that is configured in Configuration > System >
General Tab (see “General Tab“ on page 3) with the Use Limits
field set to
Visitor Cards (limited days). Note that this field is
active only when the Temp box is checked in the Card Type
field.
Use Limits Specifies the number of times or the number of days a card may
be read at a card reader to which it has valid access. A panel is
configured with one of three card use settings at Configuration >
System > General Tab (see “General Tab“ on page 3):
Visitor Cards (limited days) – Specifies a card for a visitor that
can be used only a limited number of days. The specified period
begins at the time the card is created.
Limited-Use Cards – Specifies a card that can be used only a
limited number of times.
Neither – Specifies all cards other than visitor or limited-use
cards.
If the panel is configured with Visitor Cards (limited days), the
Use Limits field accepts a number of days. If the panel is
configured with Limited-Use Cards, the Use Limits field accepts
a number of uses.
Note 1 Provides a user-defined field. See Configuring the System, page
3 for information about how this field is defined for the Add
New Card template.
Note 2 Provides a user-defined field. See Configuring the System, page
3 for information about how this field is defined for the Add
New Card template.
Access Level
Specifies the time zone, or time schedule, during which the card
holder can be granted access at a specific door.
Table 2-8: Cards > Add Cards Field Descriptions (continued)
Field Description
To Next Page
Loading...
