2-14 www.honeywell.com
Configuring via the Web Server
Configuring the System
Port Number Specifies the port number for the Ethernet port
(default is 3001).
Time Sync Synchronizes the panel’s time with the host’s
time.
Enabled – Causes the panel(s) to be
automatically time-synchronized with the
host.
Loop Baud Rate Specifies the transmission rate (bits per
second) among the downstream NetAXS™
panels on the loop. For NetAXS downstream
panels, it is recommended that you select
115,200.
Force Baud Reset
Tells all downstream NetAXS panels to
change to the selected Downstream baud rate.
This saves the user from having to go to each
panel one by one
Table 2-2: Configuration > System > Host/Loop Communications Tab Field
Descriptions (continued)
Host/Loop Setting Description
To Next Page
Loading...
