Honeywell NetAXS - Page 53

Configuring via the Web Server
Configuring Access Levels
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-35
Steps to create an access level
:
1. Select the door(s). The access level will allow access only at the door(s) you select here.
2. Enter the name of the access level in the
Name field. This should be a unique name that
identifies the general user group.
3. Select the time zone you want from the drop down list in the
Time Zone field. The access level
will allow access to the card holder only during this time zone.
4. Click the
Add Level button.
Steps to modify an access level:
1. From the drop down list in the Level field, select the number of the access level you want to
modify.
2. Make the desired modifications.
3. Click the
Modify button.
Steps to delete an access level:
1. Select the number of the access level you want to delete from the drop down list in the
Level
field.
2. Click the
Delete button.
3. Click
OK at the prompt to delete the access level.