Honeywell NetAXS - Page 73

Configuring via the Web Server
Configuring Users
NetAXS™ Access Control Unit User’s Guide, Document 800-00233, Revision A 2-55
Steps to create a user
:
1. Click the
New User button.
2. Enter the user’s name in the
Name field (at least five characters).
3. Enter a unique password in the
Password field (at least five characters). Note
that a duplicate password will not be accepted.
4. Select the type in the
Account Type field.
5. Select the Account Status:
– Enabled – Activates the user account (the user can log in).
– Disabled – De-activates the user account (the user cannot log in).
6. Click the
Add User button.
Steps to modify a user:
1. In the
User Name field, click the name of the user you want to modify.
2. Change the name, password, account type, or account status.
3. Click the
Modify button.
Steps to delete a user:
1. In the User Name column, click the user account you want to delete.
2. Click the
Delete button.
3. Click
OK at the prompt to delete the user account.