10
1.4 Information
This manual is for use with Searchpoint Optima Plus, Searchpoint Optima Plus XTC, Searchpoint Optima
X and Searchpoint Optima Z units of mod state 9 and above. For Searchpoint Optima X and Searchpoint
Optima Z please also refer to the supplementary information sent with the product.
HoneywellAnalyticscantakenoresponsibilityforinstallationand/oruseofitsequipmentifnotdonein
accordancewiththeappropriateissueand/oramendmentoftheOperatingManual.
The reader of this Operating Manual should ensure that it is appropriate in all details for the exact
equipmenttobeinstalledand/oroperated.Ifindoubt,contactHoneywellAnalyticsforadvice.
ThefollowingtypesofnoticesareusedthroughoutthisOperatingManual:
WARNING
Identiesahazardousorunsafepracticewhichcouldresultinsevereinjuryordeathtopersonnel.
Caution: Identies a hazardous or unsafe practice which could result in minor injury to personnel, or
product or property damage.
Note:Identiesuseful/additionalinformation.
Everyefforthasbeenmadetoensuretheaccuracyofthisdocument,however,HoneywellAnalyticscan
assume no responsibility for any errors or omissions in this document or their consequences.
HoneywellAnalyticswouldgreatlyappreciatebeinginformedofanyerrorsoromissionsthatmaybefound
in the content of this document.
Forinformationnotcoveredinthisdocument,orifthereisarequirementtosendcomments/corrections
aboutthisdocument,pleasecontactHoneywellAnalyticsusingthecontactdetailsgivenonthebackpage.
Honeywell Analytics reserve the right to change or revise the information supplied in this document
without notice and without obligation to notify any person or organization of such revision or change.
If information is required that does not appear in this document, contact the local distributor/agent
or Honeywell Analytics.
1. Safety Warnings and Information