Honeywell Searchpoint Optima Plus - 19.2 Self Test

MAN0905_Issue 7_07/17 Searchpoint Optima Plus with optional HART
®
output
Operating Instructions
2108M0550
89
19.2 Self Test
If there are any latched faults or warnings set in the unit, Self Test will report the generic error code
“HardwareFaultError13”.CarryoutaSoftResettoclearthelatchesandremovethiserror.
1. Select Diagnose then Soft Reset.
2. Press Escape to return to the main menu.
19. Appendix 1 –
SHC1 Additional Functions