Honeywell Searchpoint Optima Plus - Table of Contents

MAN0905_Issue 7_07/17 Searchpoint Optima Plus with optional HART
®
output
Operating Instructions
2108M0550
4
Contents
Section Page
1. SAFETY WARNINGS AND INFORMATION 2
1.1 HOWTOUSETHISMANUAL 7
1.2 BATTERIES
8
1.3 DISPOSAL
8
  1.3.1 SearchpointOptimaPlus 8
  1.3.2 Packaging 8
1.4 INFORMATION 9
2 INTRODUCTION 9
2.1 SEARCHPOINTOPTIMAPLUS 10
2.2 SEARCHPOINTOPTIMAPLUSOPTIONS 11
2.3 TERMINATION UNIT OPTIONS 12
2.4 COMMISSIONINGANDMAINTENANCETOOLS 13
2.5 WEATHERPROTECTIONACCESSORIES 13
2.6 GASSING ACCESSORIES 14
2.7 MOUNTING ACCESSORIES 15
3 MECHANICALINSTALLATION 17
3.1 SITING 17
3.2 INSTALLATION 17
  3.2.1 StandardInstallation 18
  3.2.2 Installationwithaowhousing(samplingsystem) 19
3.2.3 Sampling system using Remote Gassing Cell (RGC) 20
3.2.4 Installation in a duct 20
3.2.5 Installation of gassing pipes for Remote Gassing Cell 23
4 ELECTRICALINSTALLATION 24
4.1 POWERSUPPLY 24
4.2 CABLINGRECOMMENDATIONS 25
4.3 EARTHREGIMES 25
4.4 CONNECTIONS 27
5 OPERATION 29
5.1 DEFAULTCONFIGURATION 29
5.2 HART
®
OPERATIONDURINGFAULT 29
6 COMMISSIONING 30
6.1 FIRSTTIMESWITCHON 30
7 MAINTENANCE 31
7.1 INTRODUCTION 31
7.2 INSPECTION 31
7.3 INSPECTIONOFAUNITFITTEDWITHAFLOWHOUSING 31
7.4 BUMPTEST(GASCHALLENGE) 32
7.5 BUMPTEST(GASCHALLENGE)WITHREMOTEGASSINGCELL(RGC) 33