EasyManua.ls Logo

Honeywell Searchpoint Optima Plus - 2.6 Gassing Accessories

Honeywell Searchpoint Optima Plus
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAN0905_Issue 7_07/17 Searchpoint Optima Plus with optional HART
®
output
Operating Instructions
2108M0550
15
2. Introduction
Storm Bafe(2108B0280) Dust Barrier(2108B0259)
Provides increased protection
against torrential rain and driven
sea-spray. Recommended for
exposed installations in maritime
locations or areas where monsoon
or tropical rain conditions are
experienced. Also provides protection
against steam and can be used in
unlteredducts.
This accessory will increase the
detector’s response time.
Used to achieve accurate calibration
of Searchpoint Optima Plus. Requires
all weather protection to be removed
except dust barrier.
Used to apply gas to Searchpoint
OptimaPlusintheeld.Suitablefor
functional checking. Fits over the
standard weather protection. (For
calibration, use the Calibration Cap).
Prevents the ingress of dust or oil
mist and protects the optics in very
wet or exposed locations. Fits under
the Standard Weather Protection.
This accessory will increase the
detector’s response time.
2.6 Gassing Accessories
Searchpoint Optima Plus has a range of accessories designed to assist with gas testing.
Calibration Cap(2108B0272) Gassing Cover(2108D0258)
Caution: The Calibration Cap and the Gassing Cover must be removed after use.
Inlet
Outlet

Table of Contents

Other manuals for Honeywell Searchpoint Optima Plus

Related product manuals