Honeywell Searchpoint Optima Plus - Page 60

MAN0905_Issue 7_07/17 Searchpoint Optima Plus with optional HART
®
output
Operating Instructions
2108M0550
60
9. Select Device Reset.
10. Press OK to initiate a Device Reset, which will clear any latched faults or warnings.
Note:Ifanycongurationchangeshavebeenmade,wait15secondsbeforedoingasoftresetorcycling
the power.
11.Thedisplayshowsaconrmationmessage.PressOK.
12. The display shows a note that the Searchpoint Optima Plus will return to normal operation,
press OK.
13. Return to the Welcome screen.
12. Commissioning using
HART
®
Communications