Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 31
Auto On Behavior
Select the desired Ignition Control / Auto On behavior.
The Thor VM1 Auto On options can be configured using the AutoOn control panel.
Please refer to that section for more details on the options below.
For information on the Ignition input signal see Vehicle 10-60VDC Direct Power
Connection and Auto-On Control Wiring Diagram.
Standard
The Thor VM1 is turned on and off manually by the user using the power button on the
front of the device.
Ignition Control
The Thor VM1 is turned on automatically when a signal is received via the Ignition Input
wire, which is part of the DC Power Cable.
Auto-On
The Thor VM1 automatically powers up when power is provided.
To Next Page
Loading...
Need help?
General
