Honeywell Thor VM1 User Manual

88 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
6. Provide mechanical support for the cable by securing it to the vehicle structure at
approximately one foot intervals, taking care not to over tighten and pinch conduc-
tors or penetrate outer cable jacket.
7. Connect the watertight connector end of the power cable to the Thor VM1 dock
power connector by aligning the connector pins to the power connector; push down
on the watertight connector and twist it to fasten securely.
8. Secure the power cable to the Thor VM1 using the Strain Relief Cable Clamps.
9. Place Thor VM1 in the Dock.
10. If using the Screen Blanking feature, install the screen blanking box or switch if not
previously installed.
11. Press the Power Switch on the back of the Thor VM1 dock.
12. Press the Power Button on the front of the Thor VM1 to turn on the Thor VM1.

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English