100Honeywell, Issue 9
March 2007
XLS80e Fire Alarm Control Panels
11.14 LCD Backlight ‘On’ Duration
This setting determines the length of time that
the backlight remains on (when not in alarm
and with the mains supply present) after the
last operation of a panel pushbutton (default
is CONSTANT, i.e. the backlight is always on).
Note: In alarm, the backlight remains on
constantly. If not in alarm and the mains
fails, the backlight remains on for one
minute only.
Set the required time within the given range
and confirm the change.
11.15 Blank Lines Between Printed
Events
This setting determines how many blank lines
there are between the end of one printout and
the beginning of the next. The default of ‘5’
enables the last printed line of a printout from
the PRN-ID printer to be visible at the paper
exit louvre.
Note: If several events are printed in quick
succession, the spacing is automatically
reduced to ‘1’ to save paper.
Set the required number of lines within the
given range and confirm the change.
NUMERIC
ENTRY,
THEN
(AT
CONFIRM
PROMPT)
DURATION SETTING TAKES EFFECT
NUMERIC
ENTRY,
THEN
(AT
CONFIRM
PROMPT)
LINES SETTING TAKES EFFECT
To Next Page
Loading...
Need help?
General
