4Honeywell, Issue 9
March 2007
XLS80e Fire Alarm Control Panels
1.4 Software Version Number
The XLS80e Series control panel software
version can be viewed by performing a lamp
test function.
Software version numbers are displayed for
the following:
a. The panel.
b. The Loop Interface PCB.
c. The Enhanced Loop Interface PCB.
1.5 EN54 Functions
This fire control panel complies with the
requirements of EN54-2/4:1997. In addition to
the basic requirements of EN54-2, the panel
may be configured to conform with the
following optional functions - the applicable
clauses of EN54-2 are referenced as follows.
Options Clause
Indications:
Fault signals from points 8.3
Recording of the numbers of
entries into fire alarm condition 7.13
Controls:
Coincidence detection 7.12
Delay of the actioning of outputs 7.11
Disablement of each address
point 9.5
Test condition 10
Outputs:
Fire alarm devices 7.8
Fire alarm routing equipment 7.9
Fault warning routing equipment 8.9
To Next Page
Loading...
