83 Honeywell, Issue 9
March 2007
XLS80e Fire Alarm Control Panels
8.2 How to Change a Passcode
The panel is supplied with default passcodes.
The manufacturer strongly recommends that
you change the default passcodes after
commissioning has been completed.
To change the passcode:
1 From the Panel Settings Menu, select the
Passcode Change option.
2 Select the passcode to be changed. In this
example the access level 2 passcode is
selected for change.
3 Type the new passcode.
FACTORY
DEFAULT
84373
000
Access 2
Access 3A
**
*****
*
Access 3
**
*
111
SEE NEXT PAGE
NEW PASSCODE,
THEN
To Next Page
Loading...
