horsch LEEB LT - Blowing out the Spraying Nozzles (Optional); Putting the Spraying System into Winter Storage

3.2.4.2 Blowing out the spraying nozzles (optional)
b
a
c
d
e
Air is blown through folding boom and noz-
zles for a few seconds to remove residual
moisture.
¾ This procedure may need to be repeated
several times to obtain the desired clean-
ing e󰘯ect.
(a) Start/stop blowing out
(b) activate left border nozzle
(c) activate right border nozzle
(d) activate left edge nozzle
(e) activate right edge nozzle
¾ Each border and edge nozzle must be se-
lected individually to blow it out. The border
or edge nozzle can be selected per side.
3.2.4.3 Putting the spraying system into winter storage
a
Refer to the Chapter Spraying system winter stor-
age for the exact description of winter storage
for the sprayer system.
(a) Start/stop process for spraying system
winter storage.
24 25