HP 12500 Series User Manual

113
CF card status LED
Table 46 CF card status LED description
LED Status Descri
p
tion
CFS
Steady on The CF card is in position and idle.
Flashing
The CF card is in position and performing read/write
operations. Do not unplug it.
Off
The CF card is out of position or offline. You can plug in or
unplug it.
NOTE:
W
hen the CF card LED is on, do not unplu
g
the CF card. To unplu
g
it, execute the umount command in
user view to uninstall the CF card, and then unplug the CF card when the CF card LED is off.
Network management port LEDs
Table 47 Network management port LED description
LED Status Descri
p
tion
LINK
Off No link is present.
Steady on A link is present.
ACT
Off No data is being transmitted or received.
Flashing Data is being transmitted and/or received.
Switching fabric module LED
Table 48 Switching fabric module LED description
LED Status Descri
p
tion
SFC (green-red)
Flashing green All the switching fabric modules are operating properly.
Flashing red
At least one switching fabric module is faulty or no switching
fabric modules are present.
Steady on The MPU is faulty.
Off The MPU is faulty.
LPU status LED
Table 49 LPU status LED description
LED Status Descri
p
tion
LC (green-red)
Flashing green All the LPUs are operating properly.
Flashing red At least one LPU is faulty.

HP 12500 Series Specifications

General

Brand	HP
Model	12500 Series
Category	Switch
Language	English