16
Ste
Command
Remarks
7. Enable the interface to log
storm control threshold
events..
storm-constrain enable log
Optional.
By default, the interface outputs log
messages when monitored traffic
exceeds the upper threshold or
drops below the lower threshold
from the upper threshold.
Displaying and maintaining an Ethernet interface
Task Command
Remarks
Display Ethernet interface
information.
display interface [ interface-type ] brief [ down ] [ | { begin
| exclude | include } regular-expression ]
display interface interface-type interface-number [ brief ]
[ | { begin | exclude | include } regular-expression ]
Available in
any view
Display traffic statistics for the
specified interfaces.
display counters { inbound | outbound } interface
[ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display traffic rate statistics over
the last sampling interval.
display counters rate { inbound | outbound } interface
[ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display information about
discarded packets on the
specified interfaces.
display packet-drop interface [ interface-type
[ interface-number ] ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display summary information
about discarded packets on all
interfaces.
display packet-drop summary [ | { begin | exclude |
include } regular-expression ]
Available in
any view
Display information about a
manual port group or all manual
port groups.
display port-group manual [ all | name port-group-name ]
[ | { begin | exclude | include } regular-expression ]
Available in
any view
Display information about the
loopback function.
display loopback-detection [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display information about storm
control.
display storm-constrain [ broadcast | multicast | unicast ]
[ interface interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Available in
any view
Clear the interface statistics.
reset counters interface [ interface-type
[ interface-number ] ]
Available in
user view
Clear the statistics of discarded
packets on the specified
interfaces.
reset packet-drop interface [ interface-type
[ interface-number ] ]
Available in
user view