HP 5120 EI Series User Manual

71
Task Remarks
Configuring the
leaf nodes
Setting the spanning tree mode
Required
Configure the device to
operate in STP mode.
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the mode a port uses to recognize/send MSTP
packets
Optional
Enabling outputting port state transition information Optional
Enabling the spanning tree feature Required
Configuring TC snooping Optional
Configuring protection functions Optional
RSTP configuration task list
Task Remarks
Configuring
the root
bridge
Setting the spanning tree mode
Required
Configure the device to
operate in RSTP mode.
Configuring the root bridge or a secondary root bridge Optional
Configuring the device priority Optional
Configuring the network diameter of a switched network Optional
Configuring spanning tree timers Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send MSTP
packets
Optional
Enabling outputting port state transition information Optional
Enabling the spanning tree feature Required
Configuring
the leaf
nodes
Setting the spanning tree mode
Required
Configure the device to
operate in RSTP mode.
Configuring the device priority Optional
Configuring the timeout factor Optional

HP 5120 EI Series Specifications

General

Brand	HP
Model	5120 EI Series
Category	Switch
Language	English