6
No. Attribute No.
Attribute
27 Session-Timeout 74 ARAP-Security-Data
28 Idle-Timeout 75 Password-Retry
29 Termination-Action 76 Prompt
30 Called-Station-Id 77 Connect-Info
31 Calling-Station-Id 78 Configuration-Token
32 NAS-Identifier 79 EAP-Message
33 Proxy-State 80 Message-Authenticator
34 Login-LAT-Service 81 Tunnel-Private-Group-id
35 Login-LAT-Node 82 Tunnel-Assignment-id
36 Login-LAT-Group 83 Tunnel-Preference
37 Framed-AppleTalk-Link 84 ARAP-Challenge-Response
38 Framed-AppleTalk-Network 85 Acct-Interim-Interval
39 Framed-AppleTalk-Zone 86 Acct-Tunnel-Packets-Lost
40 Acct-Status-Type 87 NAS-Port-Id
41 Acct-Delay-Time 88 Framed-Pool
42 Acct-Input-Octets 89 (unassigned)
43 Acct-Output-Octets 90 Tunnel-Client-Auth-id
44 Acct-Session-Id 91 Tunnel-Server-Auth-id
Extended RADIUS attributes
The RADIUS protocol features excellent extensibility. Attribute 26 (Vendor-Specific), an attribute defined
in RFC 2865, allows a vendor to define extended attributes to implement functions that the standard
RADIUS protocol does not provide.
A vendor can encapsulate multiple sub-attributes in the TLV format in attribute 26 to provide extended
functions. As shown in Figure 5, a sub-at
tr
ibute encapsulated in attribute 26 consists of the following
parts:
• Vendor-ID—ID of the vendor. Its most significant byte is 0; the other three bytes contains a code
compliant to RFC 1700.
• Vendor-Type—Type of the sub-attribute.
• Vendor-Length—Length of the sub-attribute.
• Vendor-Data—Contents of the sub-attribute.
For more information about the proprietary RADIUS sub-attributes of HP, see "HP proprietary RADIUS
su
b
-attributes."
To Next Page
Loading...
Need help?
General
