HP 5920 Series Configuration Guide

23
Configuration task list
Tasks at a
g
lance
(Required.) Creating a RADIUS scheme
(Required.) Specifying the RADIUS authentication servers
(Optional.) Specifying the RADIUS accounting servers and the relevant parameters
(Optional.) Specifying the shared keys for secure RADIUS communication
(Optional.) Specifying a VPN for the scheme
(Optional.) Setting the username format and traffic statistics units
(Optional.) Setting the maximum number of RADIUS request transmission attempts
(Optional.) Setting the status of RADIUS servers
(Optional.) Specifying the source IP address for outgoing RADIUS packets
(Optional.) Setting RADIUS timers
(Optional.) Configuring the accounting-on feature
(Optional.) Configuring the IP addresses of the security policy servers
(Optional.) Configuring the Login-Service attribute check method for SSH, FTP, and terminal users
(Optional.) Enabling SNMP notifications for RADIUS
(Optional.) Displaying and maintaining RADIUS
Creating a RADIUS scheme
Create a RADIUS scheme before performing any other RADIUS configurations. You can configure up to
16 RADIUS schemes. A RADIUS scheme can be referenced by multiple ISP domains.
To create a RADIUS scheme:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a RADIUS scheme and
enter its view.
radius scheme
radius-scheme-name
The default setting depends on the
type of startup configuration used:
• If the device starts up with initial
settings, no RADIUS scheme is
defined.
• If the device starts up with the
default configuration file, a
RADIUS scheme named system
is defined.
For more information about the
startup configuration, see
Fundamentals Configuration
Guide.
Specifying the RADIUS authentication servers
A RADIUS authentication server completes authentication and authorization together, because
authorization information is piggybacked in authentication responses sent to RADIUS clients.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English