Getting Started 1-7
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 2:50 PM
Part Number: 203118-001 File name: CH01
2. Plug the power cord into the power connector
1
on the
expansion base, then into the electrical outlet
2
.
NOTE: To plug the expansion base into an outlet in Japan, you
you must first plug the power cord into the 3-to-2-prong plug
adapter included with the expansion base. Ensure that the
ground wire is connected to a safe earth ground, then plug the
3-to-2-prong plug adapter into the electrical outlet.
Plugging In the Desktop Expansion Base
!
WARNING: To reduce the risk of personal injury, electric shock,
fire, or damage to the equipment:
■
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
■
Plug the equipment into a grounded (earthed) electrical outlet
that is easily accessible at all times.
■
Disconnect power from the equipment by unplugging the power
cord from the electrical outlet.
■
Do not place anything on power cords or cables. Arrange them
so that no one may accidentally step on or trip over them. Do not
pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
To Next Page
Loading...
