3-14 Getting Connected
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/27/98 10:55 AM
Part Number: 203118-001 File name: Ch03.doc
1. Connect the desktop expansion base to the network with a
network cable.
NOTE:
For connection instructions, refer to the previous
section, “Connecting a Network Cable.”
2. Dock the computer.
3. Turn on the system with the power switch on the computer or
the power switch on the expansion base.
4. Open the CPQNET directory.
5. Open the subdirectory for the network operating system used
on the computer.
6. Open the Readme.txt file in the subdirectory.
7. Follow the instructions in the Readme.txt file for installing
drivers for the Compaq Integrated Netflex-3 Controller.
To Next Page
Loading...
