HP LD4201 - Contrast (Command: G); Brightness (Command: H)

Real data mapping 0 : Step 0
:
A : Step 10
:
F : Step 15
10 : Step 16
:
64 : Step 100
07. Contrast (Command : g)
To adjust screen contrast. You can also adjust the contrast in the Picture menu.
Transmission
[k][g][][Set ID][][Data][Cr]
[Data] Min : 00H to Max : 64H
Acknowledgement
[g][][Set ID][][OK][Data][x]
Real data mapping 0 : Step 0
:
A : Step 10
:
F : Step 15
10 : Step 16
:
64 : Step 100
08. Brightness (Command : h)
To adjust screen brightness. You can also adjust the brightness in the Picture menu.
ENWW
Transmission/Receiving Protocol
101
2
n
d
D
r
aft