HP LD4201 - Fan Fault Check (Command: D W ); Elapsed Time Return (Command: D L)

Data Structure
Data (Hex) MODE
01 Standard
02 Music
03 Cinema
04 Sport
05 Game
Acknowledgement
[y][][Set ID][][OK/NG][Data][x]
29. Fan Fault check (Command : d w )
To check the Fan fault of the TV.
Transmission
[d][w][][Set ID][][Data][x]
[Data] Data is always FF (in Hex)
Data ff: Read Status
Acknowledgement
[w][][Set ID][][OK/NG][Data][x]
[Data] * Data is the status value of the Fan fault.
0: Fan fault
1: Fan OK
2: N/A (Not Avaliable)
30. Elapsed time return (Command : d l)
To read the elapsed time.
114 Appendix C Command reference ENWW
2
n
d
D
r
aft