Diagnosis
The Diagnosis section shows display activities and failures.
Item Description
FAN Fan status
Lamp Lamp status
Power Power status.
Temperature (inside) Temperature inside the display
Controlling a display
The Control tab allows you to control the selected display.
Power
You can turn the display on or off with a mouse-click under Power. The color of the button changes
depending on the display status.
Item Description
When the display is turned on
When the display is turned off
The display is in energy-saving mode
NOTE: When the display is turned off or in energy-saving mode, you can use Power on, Volume
control, Signal check, Fan check, and Lamp check functions only.
Select Input
Use Select Input to select an input type supported in the display.
NOTE: The input type supported in the display might vary depending on the model.
Volume
Volume is used to adjust the position of the slider to set the volume between 0 and 100.
ENWW
Display configuration
63
To Next Page
Loading...
Need help?
General
