G FAN Displays the fan settings of the monitors included in the selected group.
H LAMP Displays the lamp settings of the monitors included in the selected group.
I Temp Displays the temperature settings of the monitors included in the selected group.
Deleting a group
You can delete a monitor and group added in the Add Monitor pane. The following sections describe
how to delete a monitor and group.
Deleting a group
1. Right-click a group to delete. The shortcut menu appears.
2. Click Remove Group from the shortcut menu. The selected group is now deleted.
Deleting a display from a group
1. Right-click a monitor to delete from a group. The shortcut menu appears.
2. Click Remove Monitor from the shortcut menu. The selected monitor is now deleted from the
group.
Deleting a display
You can completely delete a monitor added in the Add Monitor pane.
The following describes how to completely delete a monitor from the Add Monitor pane:
1. Right-click a monitor to delete under the Single node. The shortcut menu appears.
2. Click Remove Monitor from the shortcut menu. The selected monitor is now deleted.
NOTE: Deleting a monitor under Single in the Add Monitor pane will also delete the same monitor
added in the group.
Adding a tag to a display
By default, diplays added in the Add Monitor pane have only the IP address displayed. You can also
add a tag for each display to identify it easily.
The following describes how to add a tag to a display:
1. Right-click a display to add a tag. The shortcut menu appears.
2. Click Add Tag. The Add Tag dialog appears.
3. Enter a tag name in the New Tag field, and then click Set.
You can see the tag is added before the IP address of the display in the Add Monitor pane.
ENWW
Display and group management
61
To Next Page
Loading...
Need help?
General
