Using Movie List
Use Movie List to play movie files on a USB storage device.
Information about using Movie List
ł
MOVIE (*.avi) supporting file
ł Video format—MPEG1, MPEG2, MPEG4 (does not support Microsoft MPEG 4-V2, V3)
ł Audio format—Mpeg, Mp3, PCM, Dolby Digital
ł
Sampling frequency—within 32k to 48 khz
ł Bit rate—32k to 320 kbps
ł Subtitle format—*.smi/ *.srt/ *.sub (MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt (DVD Subtitle
System)
ł If the video and audio structure of recorded file is not interleaved, either video or audio is
outputted.
ł
Maximum FPS (frame per second) can be reached only at SD level. FPS is 25 FPS (720*576) or
30 FPS (720*480) depending on Resolution.
ł Files more than 25 FPS or 30 FPS or higher might not be played properly.
ł
A video file name and its subtitle file name must be identical for it to be displayed.
ł
Playing a video via a USB connection that does not support high speed might not work properly.
ł USB storage devices below USB 2.0 are supported as well, but they might not work properly in
the Movie List.
ł
Files encoded with GMC (Global Motion Compensation) might not be played.
File
Extension name
Video decoder Audio codec Max. resolution
mpg, mpeg, vob, dat MPEG1, MPEG2 AC3, MPEG, MP3, PCM 720 x 576 @ 25p
720 x 480 @ 30p
Avi, m4v MPEG4-SP, MPEG4-ASP,
Xvid
AC3, MPEG, MP3, PCM
Movie selection and menu options
ł Play—Play the selected movie
ł Mark All—Mark all movies in the folder
ł
Delete—Delete the selected movie item
ł Close—Close the pop-up menu
ENWW
Using Movie List
45