HP LD4201 - Auto Volume (Command: D U); Speaker (Command: D V)

[Data] Data is always FF (in Hex)
Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
[Data] 0 : Lamp Fault
1 : Lamp OK
2 : N/A(DPM/Power Off)
33. Auto volume (Command : d u)
Automatically adjust the volume level.
Transmission
[d][u][][Set ID][][Data][x]
[Data] 0 : Off
1 : On
Acknowledgement
[u][][Set ID][][OK/NG][Data][x]
34. Speaker (Command : d v)
Turn the speaker on or off.
Transmission
[d][v][][Set ID][][Data][x]
[Data] 0 : Off
1 : On
Acknowledgement
116 Appendix C Command reference ENWW
2
n
d
D
r
aft