HP LD4201 User Manual

3. Press the right arrow  button, and then use the down arrow  or up arrow  button to set the
hour (00h–23h).
4. Press the right arrow  button, and then use the down arrow  or up arrow  button to set the
minutes (00–59 min).
NOTE: In the event of a power interruption (disconnection or power failure), the Sleep Timer clock
must be reset.
Auto Off
To set the display to switch to the off mode automatically after 10 minutes if Auto Off is active and
there is no input signal:
1. Press the MENU button, and then use the down arrow  or up arrow  button to select the
TIME menu.
2. Press the right arrow  button, and then use the down arrow  or up arrow  button to select
the Auto Off menu.
3. Press the right arrow  button, and then use the down arrow  or up arrow  button to select
On or Off.
Power On Delay
When connecting multiple displays and turning the power on, the displays are turned on individually
to prevent overload.
Using Key Lock
The display can be set up so you can only use the remote control. To lock or unlock the OSD screen
adjustment:
1. Press the MENU button, and then use the down arrow  or up arrow  button to select the
OPTION menu.
2. Press the right arrow  button, and then use the down arrow  or up arrow  button to select
the Key Lock menu.
3. To lock the OSD screen adjustment, press the right arrow  button, and then use the down
arrow  or up arrow  button to select On.
4. To unlock the OSD screen adjustment, press the MENU button on the remote control, and then
use the down arrow  or up arrow  button to select Off.
ENWW
Using the On-Screen Display menu
39
2
n
d
D
r
aft

HP LD4201 Specifications

General

Brand	HP
Model	LD4201
Category	Monitor
Language	English