Upgrade
HP Network Sign Manager supports firmware upgrades for the display.
The following describes how to upgrade the display firmware in HP Network Sign Manager:
1. Under Add Monitor, click a display for which the firmware is to be upgraded.
2. Click the Upgrade tab.
3. In the Upgrade Item drop-down list, select the device to upgrade.
ł
Ethernet—Firmware for the Ethernet network card installed in the display
ł
Monitor—Firmware for the display
4. Under Selected Upload File, click Upload. The Open dialog appears.
5. Select a firmware to upgrade, and then click Open.
6. Under Progress to start upgrading, click Start. The firmware upgrade progress appears. The
Download Complete message appears when the upgrade is complete.
7. Click OK to complete the firmware upgrade.
ENWW
Upgrade
79
To Next Page
Loading...
Need help?
General
