HP LD4201 - Remote Lock;Key Lock (Command: M); Balance (Command: T)

13. Remote Lock /Key Lock (Command : m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the remote control and the local keys.
Transmission
[k][m][][Set ID][][Data][Cr]
[Data] 0 : Off
1 : On
Acknowledgement
[m][][Set ID][][OK][Data][x]
[Data] 0 : Off
1 : On
14. Balance (Command : t)
To adjust the sound balance.
Transmission
[k][t][][Set ID][][Data][Cr]
[Data] Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step L50
64H : Step R50
Acknowledgement
[t][][Set ID][][OK][Data][x]
106 Appendix C Command reference ENWW
2
n
d
D
r
af
t