Saving and loading display configuration
All display settings set in HP Network Sign Manager can be saved as a file. You can import the saved
settings later when necessary.
Saving display configuration
The following describes how to save the current display settings:
1. Right-click a display for which the settings are to be saved.
2. Click Save Configuration from the shortcut menu. The Save As... dialog appears.
3. Enter a file name, and then click Save. The Finish Save Configuration message appears when
it is successfully saved.
Loading display configuration
You can import (load) the saved settings to restore the display settings easily.
The following describes how to import the saved display settings.
1. Right-click a display for which the settings are to be imported and restored.
2. Click Load Configuration from the shortcut menu. The Open dialog appears.
3. Select the display settings file to import, and then click Open. The selected settings are imported
for the display, and the Load Configuration Status dialog shows the progress. The
Configuration load complete message appears when they are successfully imported.
68 Chapter 6 Installing HP Network Sign Manager ENWW
To Next Page
Loading...
Need help?
General
