HP LD4201 User Manual

5. Turn on power to the display by pressing the power button.
Figure 3-17 Power button[Author note:]Update graphic-Needs a new graphic of front of
display.
6. Turn on the media player/computer.
7. Select an input signal.
Press the INPUT button on the remote control to open the Input List, select the appropriate
input signal (RGB, HDMI/DVI, DP), and then press the OK button to save your change.
Or, press the SOURCE button on the back of the display, and then press the AUTO/SET button
to save your change.
NOTE: If connecting more than one input source, connect the signal cables [HDMI/DVI, RGB
(VGA), and DisplayPort] to each media player/computer. Press the INPUT button on the remote
control to select the input to view.
ENWW
Connecting to external devices
19
D
r
af
t

HP LD4201 Specifications

General

Brand	HP
Model	LD4201
Category	Monitor
Language	English