8. Check for errors in the hotplugd daemon log file (default: /var/adm/hotplugd.log).
The critical resource analysis (CRA) performed while doing an attention button initiated
add action is very restrictive and the action will not complete—it will fail—to protect critical
resources from being impacted. For finer control over CRA actions use pdweb or the olrad
command. See the Interface Card OL* Support Guide located on the Web at http://
docs.hp.com for details.
9. Replace the top cover.
10. Connect the cables to the installed PCI card.
PCI-X Card Cage Assembly I/O Cards 49
To Next Page
Loading...
