compare_luns stop
Stops running a LUN compare job. Use this command if you need to restart the compare process due
to some technical or business need. Use this command also on already-configured scheduled jobs to
change the scheduling time.
Session: miguser
Example:
MPX200 (miguser) #> compare_luns stop
Job Type Status Job Description
ID
--- ---- ------------------------ -------------------------------------
0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000
Please select a Job Id from the list above ('q' to quit): 0
All attribute values for that have been changed will now be saved.
MPX200 Multifunction Router 211
To Next Page
Loading...
