Displays detailed LUN information for a specified
target and LUN. See “show LUNinfo com-
mand” on page 294.
luninfo
Displays LUN mappings. See “show lunmask
command” on page 295.
lunmask
Displays information about LUNs and their targets.
See “show LUNs command” on page 294.
luns
Displays memory usage. See “show memory
command” on page 295.
memory
Displays the router’s management port (10/100)
configuration. See “show mgmt com-
mand” on page 296.
mgmt
Displays the router’s NTP configuration. See “show
NTP command” on page 296.
ntp
Displays information about the router's perform-
ance. See “show perf command” on page 297.
perf [ byte | init_rbyte |
init_wbyte | tgt_rbyte |
tgt_wbyte ]
Displays the targets presented by the router: FC,
iSCSI, or both. See “show presented targets
command” on page 298.
presented_targets [fc or iscsi]
Displays the router's properties. See “show prop-
erties command” on page 299.
properties
Displays the router’s SNMP properties and trap
configurations. See “show SNMP com-
mand” on page 299.
snmp
Displays the router's FC and iSCSI statistics. See
“show stats command” on page 300.
stats
Displays router product information, including the
serial number, software version, hardware version,
configuration, and temperature. See “show system
command” on page 302.
system
Displays the targets discovered by the router: FC,
iSCSI, or both. See “show targets com-
mand” on page 303.
targets [fc or iscsi]
Displays the VPGs. See “show VPGroups com-
mand” on page 303.
vpgroups [vpgroup index]
Show CHAP
Displays the CHAP configuration for iSCSI nodes.
NoneAuthority
show chap
Syntax
Command referencecommand reference288
To Next Page
Loading...
